Post by account_disabled on Aug 29, 2023 11:02:07 GMT
The size of the climbing wall is 2.4m*1.2m. But the distance between the beams of the supporting wall is 41 cm, and the width is 1.2 m and the height is 2.4 m. To fasten your retaining wall pieces together, place them on the floor and nail the joints with at least 2 nails using a hammer or nail gun.
When placing the prepared support wall on the wall of the building, it should be parallel to the upper part of the wall at a distance of 30 cm, but it should be fixed at the lower part. When fixing the upper part of the retaining wall , fasten it to the ceiling using 2 size 14 screws with a distance of 30 cm between the joists . When fixing the lower part, place it against the wall and the floor and fasten it to the floor in the same way as above.
Prepare the 2.4 m x 1.2 m plywood that matches the size of Qatar Mobile Number List the retaining wall frame using a power saw.
When installing the plywood, drive nails into each joist of the retaining wall. After that, a hole is made in the wall for holding and stepping stones for climbing. To do this, draw a square of 20cm*20cm at any place you want, and drill using a 1.1cm drill bit at the intersection points of the drawn lines.
And so, the last stumbling blocks and stepping stones will be determined, and you can decide for yourself whether the easy-to-climb alliance will be an obstacle.
You can choose the stones yourself from the designated store and the stones come with a special fixing bracket. By placing it in the hole you prepared, your climbing wall is ready. If you choose stones with a variety of color patterns, try not to place the same color side by side.
When placing the prepared support wall on the wall of the building, it should be parallel to the upper part of the wall at a distance of 30 cm, but it should be fixed at the lower part. When fixing the upper part of the retaining wall , fasten it to the ceiling using 2 size 14 screws with a distance of 30 cm between the joists . When fixing the lower part, place it against the wall and the floor and fasten it to the floor in the same way as above.
Prepare the 2.4 m x 1.2 m plywood that matches the size of Qatar Mobile Number List the retaining wall frame using a power saw.
When installing the plywood, drive nails into each joist of the retaining wall. After that, a hole is made in the wall for holding and stepping stones for climbing. To do this, draw a square of 20cm*20cm at any place you want, and drill using a 1.1cm drill bit at the intersection points of the drawn lines.
And so, the last stumbling blocks and stepping stones will be determined, and you can decide for yourself whether the easy-to-climb alliance will be an obstacle.
You can choose the stones yourself from the designated store and the stones come with a special fixing bracket. By placing it in the hole you prepared, your climbing wall is ready. If you choose stones with a variety of color patterns, try not to place the same color side by side.
